Probe-Lease Model BRP800 Permaganate Pump
What is this pump used for?
The BRP800 was designed to pump chemicals that are injected in high volumes where low volume/high pressure pumps are not well suited. With acids, the need for a high volume/medium pressure pump is evident. The BRP800 fits this need.
What should I NOT pump with this machine?
ORC®, Bentonite Grout, HRC®, Cement, or any material that has ability to set up in a hardened state when dehydrated or dried. Materials such as HRC® or molasses should not be pumped due to their high viscosity, nor should ORC® and cement-based grouts due to their tendency to harden inside the pump.
How do I deliver material to the pump?
A gravity-fed supply is recommended, especially when operating the pump at high flow rates. The BRP800 has the ability to prime itself, and it is capable of drawing material out of a 55-gallon drum as well. The pump is supplied with a 1.0 in. PVC hose assembly.
How does the pump operate?
The pump is driven by a 9HP Honda engine with 2:1 gear reduction and centrifugal clutch. The pump will operate at most engine speeds.
How much time is required for cleanup?
Cleanup is fairly straightforward. After pumping is complete, simply allow clean water to run through the pump at high speed for several minutes. This flushes any residual chemicals or materials out of the pump.
Benefits of the BRP800 Injection Pump
- Mobile... compact
- T-bar handle accomodates hand towing or vehicle towing
- Few replaceable parts
- High volume ... 8 gpm
- Outlet pressure... 650 psi
- Operates independently of probe machine
- Use without vehicle nearby
- Optional suction hose designed to withstand harsh oxidants
- Optional outlet hose is TeflonŽ lined with stainless steel jacket to withstand oxidants
- Capable of "bottom up" or "top down" injections
- Self-priming pump
- Internal components of pump resistant to harsh oxidants, such as permanganates
- All mechanical operation -- no electronics on boar
- Hose hooks allow convenient storage of suction and outlet hoses
- Lift hook
- Ground spike prevents the pump from "walking" during operation
(ORC® and HRC® are registered trademarks of Regenesis Bioremediation Products, San Clemente, CA.)